Free Shipping to Mainland UK on orders over 20

Wilkinson E-Z-LOK Schaller style machine heads


Classic mini oval vintage button with sealed housing and 45 degree fixing tag. 6-in-line.

Ratio: 19:1
Colours: Chrome
Set of 6
Supplied with screw in bushes, washers and screws.

Designed to work on guitars of all styles E-Z-Lok are the ultimate in the quest for perfect tuning stability.
Unlike ordinary tuners each E-Z-Lok post has 2 holes.
This simple concept transforms each tuner into the tuner you want it to be.
Want to string conventionally? OK then do it!
Want to change the tension over the nut? OK, use the upper hole to decrease the tension, use the lower hole to increase the tension.
Want to stay in tune when using a Vibrato / Tremolo system? Then OK, you can
do this too. Eliminating the wraps around a tuner post is a 'must do' when using a vibrato system.
Thread the string through either top or bottom hole, pull the string tight and make a wrap around the post then thread the remaining string through the second hole pull tight again and you now have a locking tuning key. The string is now firmly attached with less than half a turn around the tuner post when tuned to pitch. (See diagram below)

Take care during installation.
Screw pilot holes should be drilled one size below the thread size and screws lubricated before installing. Use a correctly fitting screwdriver with minimal force - if screw is tight, stop, remove and enlarge the pilot hole. Do not attempt to force the screw.

Add to Cart:

  • Model: WJN05
  • Manufactured by: Wilkinson

This product was added to our catalog on Friday 14 December, 2012.

Your IP Address is:
Copyright © 2020 Axecaster. Powered by Zen Cart